Techniques for obtaining ranges of notes
- opening and closing holes in the side of the tube to adjust the effective length of the vibrating air column (this can be done by covering the holes with fingers or pressing a key which then closes the hole). This is most common on woodwind instruments.
- engaging valves which re-route the air through additional tubing. This increases the total tube length, thereby lowering the fundamental pitch. Used on brass instruments.
- lengthening the tube with a sliding mechanism (as on the trombone)
- making the column of air vibrate at different harmonics.
Types of wind instruments
Wind instruments fall into one of the following categories:
- Brass instruments
- Woodwind instruments
Although brass instruments were originally made of brass and woodwind instruments have traditionally been made of wood, the material used to make the body of the instrument is not always a reliable guide to its family type. For example, the saxophone is typically made of brass but is classified as a woodwind instrument due to the fact that it has a reed. On the other hand, the cornett (not to be confused with the brass instrument cornet) and serpent, although made of wood (or PVC pipe in the case of modern serpents), are in the family of brass instruments because the vibration which originates the sound is done with the lips of the player.
A more accurate way to determine whether an instrument is brass or woodwind is to examine how the player produces sound. In brass instruments, the player's lips vibrate, causing the air within the instrument to vibrate. In woodwind instruments the player either: 1. causes a reed to vibrate, which agitates the column of air (as in a clarinet or oboe), 2. blows against an edge or fipple (as in a recorder), or 3. blows across the edge of an open hole (as in a flute).
In the Hornbostel-Sachs scheme of musical instrument classification, wind instruments are classed as aerophones.
See also
Categories: Musical instruments